Themabewertung:
  • 5 Bewertung(en) - 5 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
possible to make a camber angle?
#1
possible to make a camber angle?
Antworten
#2
Yes, but it's a lot of "try and error"
Try to look it up on the drifter cars around here.

Possible way:

Editcar -> Suspension:
-> Feather Spring: Low Value
-> Bounce Move: High Value (minimum 200-300)
-> Release Move: Zero
-> Height Compensation: ca. +200

If the car is jumping, lower the feather spring approximately to Zero.
Zwei Dinge sind unendlich: das All und die menschliche Dummheit.
Beim All bin ich mir noch nicht ganz sicher. (Albert Einstein)
Antworten
#3
That's awesome man, did not think it was possible Smile BTW, what do you mean with a low value at the Feather spring? I used 4500 for my Audi RS4, just like i did at the original car. IF you go to low, the car won't drive anymore.

[Bild: g24pybqjpbf.jpg]
[Bild: t1isoak31mte.jpg]
[Bild: 612918]
Antworten
#4
(29.05.2012, 12:15)Jeroen schrieb: ...what do you mean with a low value at the Feather spring...

Below 1000, maybe even less, depending on the weight of the car.
With the aim to let the car "sink" into the Feathers.

(29.05.2012, 12:15)Jeroen schrieb: ...the car won't drive anymore...

... probably because it's sitting on the ground.
You have to raise the car with "Height compensation" to lift it up to a height where it can sink into the feathers, without sinking to the ground.

I did this with a car, it looked good, but was hard to drive.
I had no more spur to enhance it, so I have no finished Editcar with good driving characteristics.

Zwei Dinge sind unendlich: das All und die menschliche Dummheit.
Beim All bin ich mir noch nicht ganz sicher. (Albert Einstein)
Antworten
#5
hmm, not to sure if i agree with you there.

First, let's take a look at the ride i "cambered":
[Bild: r5hkveu6k7lw.jpg]
[Bild: 3b1e81peruk.jpg]
That is how it looks at the moment. In my opinion like camber should be, I could make more camber, but then front wheels come trough the body when I steer, or the car will be way too high.

Then the settings i've used:
[Bild: 5fpupbm7qe13.jpg]
I've used 4500 in order to keep the car drive-able. If you set it at around 1000, car will float on the road, and you have no possibility of steering whatsoever. So maybe you could try what I did, then car will drive, and camber will look good I think Smile

In every case, thanks for the stuff you told, helped me a lot with creating it Smile
[Bild: 612918]
Antworten
#6
Cheers, Jeroen, you did it! Applause

My attempts were more like "let's see what happens", than serious trys.
And I was kind of wrong with my +200 for height comp, must be -200 of course...

Also your contribution is very helpful. (more than mine! Smile)
I heard the question for camber before, so some moderator should put it into the tutorial section!
Zwei Dinge sind unendlich: das All und die menschliche Dummheit.
Beim All bin ich mir noch nicht ganz sicher. (Albert Einstein)
Antworten
#7
This looks so awesome!!!! Never know that is possible! I will try it in some of my drift machines!!
thanks for this great advice!
@Jeroen: Have Your car got moveable suspension? Coz I tested it on car with suspension and it doesn't work, or maybe i did something wrong.
Also this thread should be moved to the Tutorial Section I hope that moderator will have a look at this!
[Bild: mnHbKcd.jpg]
Antworten
#8
thanksmodall! you inspired me for this, i worked it out Wink

@Matt, i don't know anything about moving suspension, you should try that, i didn't do anything with that. And there is one little problem, some times car height isn't good anymore, like when driving on ovals Wink
[Bild: 612918]
Antworten
#9
I edited my post, well it doesn't work with suspension of my cars, need to check original one.
EDIT: After test with orginal game content I say that it doesn't work Sad
Only non suspension cars seems more friendly for such camber effect.
I found some Tiberio's shit converts on my HDD so I choosed it to play with, and here is the results:
[Bild: 79fb66192836209.jpg]
[Bild: mnHbKcd.jpg]
Antworten
#10
Thanks!))))))))
Antworten


Möglicherweise verwandte Themen...
Thema Verfasser Antworten Ansichten Letzter Beitrag
  Camber & Toe-in Valvikan 24 7.669 05.12.2018, 19:01
Letzter Beitrag: Autobahn-4ever
  How to make nagative on wcheels ? marcoss18 1 1.373 10.04.2014, 16:09
Letzter Beitrag: modall
Wink Make traffic faster in Burning Wheels / AFC11 tgp1994 0 1.425 10.09.2012, 06:06
Letzter Beitrag: tgp1994
  will make anyone vinyl for AE86 marcoss18 2 1.472 24.07.2011, 11:22
Letzter Beitrag: marcoss18
  WR2 how to make interior vex90 3 2.249 02.07.2010, 11:33
Letzter Beitrag: lsddoors93



Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste